THE 63 - 72 COMBO DEAL

LIMITED TIME OFFER ... THE 63-72 COMBO DEAL

Combo Deal Includes: 
Gen2 IFS Kit
Gen2 Back Half Kit
FREE COMMERCIAL FREIGHT SHIPPING ($600 value)
plus
FREE ACCESSORIES BUNDLE - Universal Transmission Cross Member & Universal Air and Fuel Tank Mount ($285 Value)
 
Details:
Gen 2 C10 IFS Kit
 
Our new IFS kits for the 63-72 C10's are now available. Designed around our proven geometery, in a new compact design. These kits incorporate a built in 3" drop and  a pre determined narrowed track width, allowing for large wheel/tire packages at a low ride height.  We have also relocated the wheel center line to be placed in the center of the fender opening, resulting in proper alignment. This kit will allow your truck to lay frame on a 30-inch tire, regardless of wheel size. The new design incorporates fabricated upper and lower control arms that offer a tighter turning radius and increase wheel options. Our new 17-4 HT SS spindle pins offer a direct bolt on application with no spindle modifications required.
 
Each kit includes:
IFS Cross Member
Fabricated Upper Control Arms
Upper Ball Joints
Billet Upper Ball Joint Cap
Fabricated Lower Control Arms
Lower Control Arm Bushings
Lower Control Arm Bushing Sleeves
Lower Ball Joints
Lower Shock Mount
Upper Shock Mount
KYB Shocks (344067)
Inner Frame Stiffeners
Motor Mount Tabs
Motor Mount Billet Upright
Motor Mount Bushings
Motor Mount Bushing Sleeves
Motor Mount Block Mount (LS or SBC)
Upper Control Arm Mounts w/ Bag mounts
Billet Cross Shafts
Delrin Bushings
Crush Sleeves
Billet Washers
Billet Tie Rod Adapters
¾ Joints
¾ Jam Nut
9/16 Jam Nut
Misalignment Spacer
17-4 Tie Rod Stud
Rack Notches
Air Bags
 
Inspired by our popular Gen2 C10 Chassis, we now offer this configuration in a back half kit. Fully fabricated frame rails will replace your OEM frame from the rear cab mounts back. This new design offers a narrow over all width of 34" for larger wheel and tire packages and a shorter over all height for additional bed floor depth. 
 
What's included:
•    Fabricated Rear Frame Rails 
•    Fabricated Frame Adapters w/ Exhaust Cut Outs
•    Fabricated Rear Body Mounts 
•    Trailing Arm Suspension 
•    Trailing Arm Cross Member w/ Exhaust Cut Outs 
•    Ubolts 
•    Trailing Arm Axle Mounts 
•    Axle Bag Mounts 
•    Watts Link w/ Machined Links 
•    Bags 
•    KYB Shocks 
•    Formed Rear Crossmember 
•    All Hardware

 
*LEAD TIMES APPLY. Free shipping to a commercial address WITH a forklift or loading dock, additional fees for residential address and/or liftgate.
* Kit is designed for a 30" Tire
* "High Hump" Trans Tunnel Required
*Does NOT include spindles. Recommended Part # CPP CP30106-3
* Does NOT include rack and pinion. Recommended part #101-0107 or M21400